Low temperature heat capacity measurements of β-Si3N4 and γ-Si3N4: Determination of the equilibrium phase boundary between β-Si3N4 and γ-Si3N4

Isobaric heat capacities of β-Si₃N₄ and γ-Si₃N₄ were measured at temperatures between 1.8 and 309.9 K with a thermal relaxation method. The measured heat capacities of γ-Si₃N₄ are smaller than those of β-Si₃N₄ in this temperature range. Using these data, we determined the standard entropies of β-Si₃N₄ and γ-Si₃N₄ to be 62.30 J·mol⁻¹ K⁻¹ and 51.79 J·mol⁻¹ K⁻¹, respectively. The equilibrium phase boundary between β-Si₃N₄ and γ-Si₃N₄ was calculated using these values and thermodynamic parameters reported in previous studies. The obtained equilibrium phase transition pressure at 2000 K is 11.4 GPa. It is lower than the experimental pressures at which γ-Si₃N₄ was synthesized in previous studies. The calculated Clapeyron slope at this temperature is 0.6 MPa K⁻¹, which is consistent with those of theoretical studies.     

A new approach to contour error control in high speed machining

High speed machining technology attempts to maximize productivity through the use of high spindle speeds and axis traverse rates. The technology is dependent upon the development of suitable mechanical hardware, electrical drives and associated control software to ensure that all components are used to maximum advantage. The role of the control software is particularly demanding since one needs to maximize traverse rates while providing the necessary accuracy, and indeed providing a margin of safety to deal with unexpected changes in process, or system parameters. There have been relatively few improvements in commercial CAD or CAM systems that would help machine tool users to take maximum advantage of high speed machining; rather the majority of the approaches have been undertaken at the machine tool controller level. This paper uses circular interpolation and corner tracking to compare several such control techniques, (Cross Coupled Control (CCC), Zero Phase Error Tracking Control (ZPETC), and Realtime Frequency Modulated Interpolation (FMI)), each of which have been proposed in the literature order to improve machining accuracy. None of these approaches are found to be universally successful when used alone and the authors, in this paper, examine the use of these systems in combination. Particular attention is focused upon an extension of a simplified version of cross coupled control together with Frequency Modulated Interpolation. It is shown that the combined system performs extremely well, and is easily actuated at high frequencies with conventional hardware. A custom built high speed x-y table is used to confirm system performance with multiple constraints present.     

Influence of Bridgman solidification on microstructures and magnetic behaviors of a non-equiatomic FeCoNiAlSi high-entropy alloy

The non-equiatomic FeCoNiAlSi alloy is prepared by the Bridgman solidification (BS) technique at different withdrawal velocities (V = 30, 100, and 200 μm/s). Various characterization techniques have been used to study the microstructure and crystal orientation. The morphological evolutions accompanying the crystal growth of the alloy prepared at different withdrawal velocities are nearly the same, from equiaxed grains to columnar crystals. The transition of coercivity is closely related to the local microstructure, while the saturation magnetization changes little at different sites. The coercivity can be significantly reduced from the equiaxed grain area to the columnar crystal area when the applied magnetic field direction is parallel to the crystal growth direction, no matter what is the withdrawal velocity. In addition, the alloy possesses magnetic anisotropy when the applied magnetic field is in different directions.     

Microwave-enhanced hydrolysis of poultry feather to produce amino acid

Poultry feather was hydrolyzed at relatively mild high temperature ranging from 433 to 473 K and autogenous pressure by intensification of microwave heating. The hydrolysate mainly contains arginine, alanine, threonine, glycine, praline, serine, glutamic acid, aspartic acid, cystine and tyrosine, which corresponds with hydrochloric acid catalytic hydrolysis. Based on the orthogonal experimental result, the total yield of amino acid attains about 54.72% with feather containing about 71.83% keratin at optimum reaction condition of temperature 473 K, time 20 min and weight ratio of water/feather 37.5. The high yield of amino acid and high efficiency of hydrolysis indicate that the microwave has better intensification on hydrolysis comparing with traditional strong acid catalytic or sub-critical hydrolysis. The apparent activation energies (E_a) are 85.12 and 63.00 kJ/mol as to the hydrolysis of feather and the degradation of produced amino acid with consecutive pseudo-first-order reaction kinetic model, and the great decrease of the values comparing with non-microwave heating should be the reason of the enhanced effect of microwave.     

火箭发动机试验台快速高效高可靠试验技术

随着卫星系统组网及发射任务的增加,某运载火箭上面级发动机需求量猛增,试验系统和试验流程已经无法满足形势任务的需求。通过技术改造和流程优化,采用了一系列多余物控制、试验流程监控及可靠性提升等技术,实现了某试验台试验的快速、高效、高可靠,大大提高了试验效率。     

High-performance 2,9-DPh-DNTT organic thin-film transistor by weak epitaxy growth method

2,9-DPh-DNTT, an isomeric of diphenyl-dinaphtho[2,3-b:2′,3′-f]-thieno[3,2-b] thiophene (DPh-DNTTs), is an emerging candidate of high mobility organic semiconductor material. In this work, a high performance 2,9-DPh-DNTT organic thin-film transistor (OTFT) is fabricated by the method of weak epitaxy growth. The quality of 2,9-DPh-DNTT thin film was significantly improved when its epitaxial layer grows on an inducing layer of para-sexiphenyl (p-6P). Continuous large-area, highly ordered and terraced 2,9-DPh-DNTT polycrystalline thin films are obtained. The hole mobility of as-fabricated 2,9-DPh-DNTT thin-film transistor reaches up to 6.4 cm² V⁻¹s⁻¹. This simple process of preparing high mobility 2,9-DPh-DNTT thin-film transistor supplies a facile route of large-area OTFT fabrication.     

Deep-blue thermally activated delayed fluorescence emitter with a very high fluorescence rate

Conventional thermally activated delayed fluorescence (TADF) molecules achieve small energy differences between the lowest singlet and triplet excited states (ΔE_ST) by enhancing the intramolecular charge transfer, which inevitably leads to a wide emission spectrum and low fluorescence rate. Here, we prepared a deep blue TADF molecule via a small ΔE_ST pyridine-phenol fluoroboron complex as the acceptor. The small ΔE_ST is maintained when carbazole donors are attached to the 4-position of the phenyl rings in the fluoroboron complex. Benefiting from the strong electron coupling between the donor (D) and acceptor (A) moieties, the compound Cz-4-BF exhibits a high fluorescence rate of 4.8 × 10⁸ s⁻¹ and a small D-A dihedral angle change in the excited state. Consequently, a photoluminescence (PL) quantum yield of nearly 100% and a PL spectrum with full-width at half-maximum (FWHM) < 60 nm were obtained in solution and low-concentration doped films. A TADF-sensitized fluorescence (TSF) device containing Cz-4-BF achieves an external quantum efficiency of 21%, which is higher than the devices employing classical fluorescent emitters and multiple resonance-type TADF emitters. The Cz-4-BF-based TSF device shows significantly improved color coordinates of (0.14, 0.10) versus a control device without Cz-4-BF.     

High nitrogen carbon material with rich defects as a highly efficient metal-free catalyst for excellent catalytic performance of acetylene hydrochlorination

In this work,we developed a simple strategy to synthesize a carbon material with high nitrogen and rich carbon defects.Our approach polymerized diaminopyridine(DAP) and ammonium persulfate(APS).Following a range of different temperature pyrolysis approaches,the resulting rough surface was shown to exhibit edge defects due to N-doping on graphite carbon.A series of catalysts were evaluated using a variety of characterization techniques and tested for catalytic performance.The catalytic performance of the N-doped carbon material enhanced alongside an increment in carbon defects.The NC-800 catalyst exhibited outstanding catalytic activity and stability in acetylene hydrochlorination(C_2 H_2 GHSV=30 h~(-1),at 220℃,the acetylene conversion rate was 98%),with its stability reaching up to 450 h.Due to NC-800 having a nitrogen content of up to 13.46%,it had the largest specific surface area and a high defect amount,as well as strong C_2 H_2 and HCl adsorption.NC-800 has excellent catalytic activity and stability to reflect its unlimited potential as a carbon material.     

Solid state reactions between SiC and Ir

Reactivity between SiC and Ir as a function of SiC-crystallinity was investigated by diffusion bonding technique under a vacuum and over the temperature range of 1200–1450 °C. As reaction products, various Ir-silicides and free unreacted-C were detected. Reactivity is strongly affected by the temperature and SiC-crystallinity involving a series of interactions, from “no reaction” to “massive exothermic reactions”. In particular, interfacial phenomena are more pronounced by the presence of defects and grain boundaries.Solid state reactions result in formation of fine C-precipitates rearranged in a quasi-periodic microstructure. On the contrary, clustering of highly ordered C-precipitates (C-graphitized) occurs after “massive reactions” take place.A relationship between the degree of graphitization (from 1 to multi-layers of graphene), temperature and SiC crystallinity was found by Raman spectroscopy. 2D-layering phenomenon is enhanced in polycrystalline SiC at high temperature.     

Road Extraction from High Resolution Remote Sensing Image based on Shape Analysis with Gestalt Theory

Simulating the psychological experience of human vision，a road extraction model based on the format tower is proposed to extract the road in the high resolution remote sensing image from the perspective of morphology.Firstly，based on the spectral and texture information，the suspected road targets are extracted by using segmentation technology.Then these targets are classified according to their reliability and extract the road targets for each category.Finally，three types of identified road information are verified and merged，and the continuous smooth road extraction results are obtained.Experiments on real high resolution images show that the results are consistent with the visual perception of the human eye，and the overall classification accuracy is higher，indicating that the algorithm is effective and feasible and has good use value.